SVE Enamel

SVE Enamel

Surface preparation

  • For Optimum results clear the surface thoroughly with the help of sand paper, make sure there is no left over of oil, dust or grease on the surface. Emery paper 220 would be recommended with the unwanted particles doesn’t get removed.
  • For all wooden surfaces – strip all the old paint/varnish etc from the surface using emery paper no 320 and complete filling of holes and cracks. Clean and smoothen the surface by sanding along the grains with emery paper no 180. Smooth the sand surface with emery paper no 400 and dust the surface clean.
Direction For Use
Priming

a. Ferrous Metal Surface - Apply 2 coats of SVE Primer Metal with a minimum gap of 6 to 8 hrs.

b. Wood Surface - Use only SVE Primer Wood White/Grey/Pink Wood Primer.

Finishing

a. Apply 2 coats of SVE Hi-gloss enamel with minimum 8 hrs gap.

b. For Brush Application - Dilute it with 5 to 7% SVE T13 Thinner.

c. For Spray Application dilute it up to 20 % with SVE T13 Thinner

  • Provides glossy finish
  • High durability
  • High wash ability
  • Refer to Shade Card for Colours.
Variety - SVE Primer Metal
SVE Hi-Gloss Enamel
SVE Primer Wood Paint – White/Grey/Pink
Pack - 500 ml, 1 Ltr, 4 Ltr, 20 Ltr